Light Removal, Light Install
An old light, where the electrical had been disconnected long ago. Of note: that middle pipe is a gas line, a throwback to some earlier time when this light was likely powered by gas.
An old light, where the electrical had been disconnected long ago. Of note: that middle pipe is a gas line, a throwback to some earlier time when this light was likely powered by gas.
Adding in the insulation to the lower half. Mostly an easy process, but one thing to note about the soundproof insulation: it doesn’t separate/split well. This was a bit of a challenge, when trying to install it around conduit and outlets.
If you futz too much with it, the insulation tends to crumble like week-old cake.
The space on the other side of our bedroom. We got some loose insulation placed back in the floor, and got another plywood board down. Our goal is to clear this area so we can work on putting up my drywall on the other side of the bedroom wall.
I shoud say: I’m less certain when it comes to electrical, and have the most hesitation towards any electrical work. I need to study up more. For most things, I feel like if you make a mistake… there are ways to workaround and patch. With electrical, it feels like you get… one mistake.
Liz, braving the space beneath the front porch to retrieve some gardening supplies. Given how much she dislikes scampers, this really was a bold move for her.
A few more tools in the mix. I now have a standard kit for pulling up floorboards. The sawzall keeps the pieces a certain length. The crowbar is for popping up each piece. The hammer is to pull out the nails. And the Channellocks are for when the nail heads pop off, and I need to try to pry the nail out manually.
At the close of the day, I realized I had more work to do – and continued cleaning out the closet area (and filling in the gaps in the wall with foam). Though to my credit, I did decide to use gloves this time. He can be taught!
Demo day on the first floor! We’re opening up the walls between the dining room and the main hall. It’s exciting in a lot of ways, in that this is our first big bit of demo on this floor!
After work, Liz and I suited up to continue work on the office ceiling. To be honest, after a full day at the office… the last thing I wanted to do was get all covered in dirty insulation. But we were working off a new schedule, and wanted to stay on track.
Today, Liz and I were working upstairs in the office while Bob was in the basement. On the docket: demo the office ceiling.
Upstairs, I ended up covering some of the items in the office with tarp. This was a lazier solution, and didn’t involve me having to move anything out. Which was great, because I wasn’t really looking forward to walking all this stuff back downstairs.
While Liz was out on a big day full of errands, I worked a bit in the office – adding more insulation to the north wall.
Started to get back into more of a house night schedule, after a bit of time away. With the big push to get our basement floor epoxied, Liz and I expended a lot of energy… and have needed time to recharge.
Today, Liz and I went into the office to try to keep the cold at bay. Our original plan was to put insulation in the walls, but given how cold the room was… we decided to tackle specific areas where we felt leaks/drafts coming in (despite our best efforts).
We both have some vacation time coming up, towards the end of the month. And thanks to Liz’s planning, we have a good amount of work scheduled on the house. Here’s to a solid November, and to the start of what we hope will be a solid December.